If you are a regular within the iget aus community, you have likely held one of these iconic, blocky devices in your hand.
However, a question we constantly receive at Notable Vape from our customers is exactly how much nicotine in IGET Bar devices?
Understanding your nicotine intake is not just about chasing a buzz; it is about responsible vaping and knowing exactly what you are consuming.
In this comprehensive guide, we strip away the marketing jargon to give you the hard facts, proper usage instructions, and troubleshooting tips for Australia’s most popular disposable.
IGET Bar Specifications (At a Glance)
Before we dive into the chemical makeup, it is essential to understand the physical capacity of the device.
Below is the verified specification data for a standard authentic IGET Bar, updated with the latest product details.
📋 Technical Specifications
| Feature / Specification | Metric Measurement | Imperial Measurement |
|---|---|---|
| Total E-Liquid Capacity | 12.0 ml | 0.40 fl oz |
| Device Weight | 78 g | 2.75 oz |
| Dimensions (H x W x D) | 94.5 x 41.3 x 21.3 mm | 3.72 x 1.63 x 0.84 inches |
| Battery Capacity | 1400 mAh | 1400 mAh |
| Estimated Puff Count | 3500 Puffs | 3500 Puffs |
| Coil Type & Resistance | 1.2 Ω Mesh Coil | 1.2 Ω Mesh Coil |
| Material | PC + ALU | PC + ALU |
Table of Contents
What is an IGET Bar and How Does the Nicotine Work?
An iget bar is a premium, non-rechargeable disposable electronic cigarette designed for long-lasting use. The Plus 3.0 iteration takes this further with a generous 20ml reservoir and a smart LED screen for real-time status updates.
Inside the sturdy PC + ALU casing sits a 1400mAh pre-charged battery and a cotton poly-fill soaked in nicotine salts.
Nicotine salts (nic-salts) are created by adding benzoic acid to freebase nicotine, which lowers the pH level of the liquid.
This specific chemical reaction is how the iget vape delivers a satisfying dose of nicotine smoothly, without causing a harsh burning sensation in your throat.
The Core Question: How Much Nicotine in IGET Bar Plus 3.0?
Let us break down the exact mathematics regarding the nicotine concentration.
The IGET Bar Plus 3.0 contains a nicotine strength of 28.5 mg/ml. This equates to 2.85% nicotine by volume. You may see older models listed at 5% (50mg/ml); the Plus 3.0 uses a reduced yet still substantial concentration that suits a wider range of users.
Now for the total nicotine yield: with a massive 20ml of e-liquid inside, the calculation is simple.
28.5 mg/ml × 20 ml = 570 mg of total nicotine in a single device.
Fact Check: It is important to note that you do not absorb 100% of this nicotine into your bloodstream; a significant portion is lost during the vaporization process and exhalation.
IGET Bar vs. Traditional Cigarettes (Which is Stronger?)
To put the 28.5 mg/ml concentration into perspective, we must compare it to combustible tobacco.
An average tobacco cigarette yields roughly 1.5 mg to 2 mg of nicotine actually absorbed by the smoker.
With 570 mg of total nicotine on board, a single 10000-puff IGET Bar Plus 3.0 holds the rough equivalent of 285 to 380 traditional cigarettes in terms of raw nicotine content. This is a substantial amount, and the device should be treated with respect.
Because the nicotine salt formulation hits the bloodstream in less than 10 seconds, new users should take smaller, spaced-out puffs to avoid nicotine sickness (often called “nic-sick”).
Step-by-Step Instructions: How to Use Your Device Properly
Getting the best flavour and maximizing your 10000 puffs requires correct handling from the moment you open the box.
1: Unboxing and Unsealing
Remove the device from its foil packaging carefully.
You will notice a silicone plug inside the mouthpiece and a sticker covering the airflow hole at the base.
You must remove both the top plug and the bottom sticker; failing to do so will create a vacuum, and the device will not fire.
2: The Priming Puff
Take a very gentle, short puff (about 1 second long) without inhaling deeply.
This gentle draw helps pull the e-liquid from the outer cotton shell directly into the center heating coil.
Wait roughly 30 seconds after this initial puff before taking a full drag to ensure the cotton is fully saturated.
3: Checking the Smart LED
Your IGET Bar Plus 3.0 features a smart LED display. During use, the screen shows your remaining e-liquid level and battery life. If the LED flashes, it’s time to dispose of the device responsibly.
4: Proper Storage
Always store your vape upright on a flat surface.
Leaving the device lying flat or inside a hot car can cause the e-liquid viscosity to thin out, leading to internal leaking and spit-back through the mouthpiece.
Frequently Asked Questions (FAQ)
Q1: Is 28.5 mg/ml (2.85%) a lot of nicotine?
Yes, 2.85% nicotine is considered a high concentration, though it is smoother than the older 5% (50 mg/ml) formula. It is ideal for heavy smokers transitioning to vaping but may be too strong for complete beginners. If you feel dizzy or nauseous, stop vaping and consider a lower strength next time.
Q2: How long should an IGET Bar Plus 3.0 last me?
With 10000 puffs, an average user taking 150 to 200 puffs per day can expect the device to last between 50 and 66 days, which is significantly longer than previous models.
Q3: How do I know if my IGET Bar is fake?
Authentic devices feature a QR code on the back of the box. Scanning this code should direct you to the official manufacturer’s verification page.
Q4: Can I refill the e-liquid once it runs out?
No. This device is a closed-system disposable. Attempting to pry off the mouthpiece to add more liquid can damage the internal battery and cause a dangerous chemical fire.
.